You are here:

Fully Automated Coin Based Water Dispenser System Using Microcontroller and Sensor


Ronelex Electronics/ Coin Based Water Dispenser System

In this Fully Automated Coin Based Water Dispenser System, it is using a microcontroller and a sensor. In the picture below it shows the sequence on how the system works. The system is using Infrared sensors which is used to detect the presence of the glass and the sensor give the signal to the controlling system to check if the glass is placed and if the glass is in position, it starts the motor pump to pour water in glass as long as the glass is in position. Then if the glass is removed while it is pouring the water, the system automatically stops/pause if it doesn’t detects or when you removed the glass in position and resume its operation again if it detects the glass is put/placed in the position.



For more Electronics Repair and troubleshooting guide, please click here.  

You can also visit our Facebook Page Ronelex Electronics Shop.

Or you can come to our physical shop located at Maria Clara Street, Tagbilaran City, Bohol.

Posted by Ronelex 0 Responses